Page 1 of 2

Angel's Envy

Posted: December 10th, 2021, 9:15 am
by Jim Hall
Just getting started but thought I would throw in a couple of pics to give you an idea of where I'm headed. Doesn't look like it, but there is quite a bit of elevation change; e.g., it is a drop of almost 30' from the tee to green on Hole 1.
Hole 1.jpg
(288.56 KiB) Not downloaded yet
Hole 2.jpg
(260.17 KiB) Not downloaded yet

Re: Angel's Envy

Posted: December 10th, 2021, 11:01 am
by SteveHorn
Jim
Looks like another good start to a quality course. Was wondering if you have given up on Widow's Kiss. I really loved what you had going there.

Re: Angel's Envy

Posted: December 24th, 2021, 11:34 am
by Jim Hall
Thanks, Steve! Here is another teaser :)
Hole 5 - Approach.jpg
(338 KiB) Not downloaded yet

Re: Angel's Envy

Posted: December 24th, 2021, 4:44 pm
by DC#1
I like what I see Jim. Nice work on the elevations to the left of 5 fairway.

Re: Angel's Envy

Posted: January 5th, 2022, 9:01 am
by Jim Hall
Thanks, DC.

Some update pics:
Hole 9.jpg
(164.29 KiB) Not downloaded yet
Hole 10.jpg
(166.65 KiB) Not downloaded yet

Re: Angel's Envy

Posted: January 16th, 2022, 9:47 am
by Jim Hall
Hole 16.jpg
(373.39 KiB) Not downloaded yet

Re: Angel's Envy

Posted: January 16th, 2022, 11:55 am
by SteveHorn
Love the contour's of the green. Better put the ball in the correct area depending on pin placement or good chance of a 3 putt.

Re: Angel's Envy

Posted: January 22nd, 2022, 1:09 pm
by Jim Hall
Finished Angel's Envy. Just playing around with the rock textures. The light model for the game is much different than that for the architect. The former tends to wash out highlights and contrast whereas the latter does not. Will probably wind up creating 3-4 rock textures of different darkness to make up for that.

Oh, and most of you probably knew this, but I'm slow. Always had a hard time creating a straight texture edge using multiple points. Finally realized the shortest distance between two points is a straight line. No longer using multiple points when making a texture that I want to be as straight as possible. Makes a huge difference :)

Re: Angel's Envy

Posted: January 23rd, 2022, 10:43 am
by Jim Hall
Angel's Envy has been uploaded.

Re: Angel's Envy

Posted: January 27th, 2022, 6:10 pm
by BrianZ111
I'm currently on the road for work but will try to get this up sometime this weekend. Thanks for your patience.